FANDOM


800px-Chichen Itza 3.jpg

Earthquake-proof and massive pyramid El Castillo, Chichen Itza.

Earthquake engineering structures are designed and constructed to withstand various types of hazardous earthquake exposures at the sites of their particular location.

Earthquake engineering is treating its subject structures like defensive fortifications in military engineering but for the warfare on earthquakes. Both earthquake and military general design principles are similar: be ready to slow down or mitigate the advance of a possible attacker.

According to building codes, earthquake engineering structures are meant to "withstand" the largest earthquake of a certain probability that is likely to occur at their location. This means the loss of life should be minimized by preventing collapse of the buildings [1].

Ancient architects believed that devastating earthquakes were a result of wrath of gods and therefore, could not be resisted by humans.Template:Citation needed Nowadays, the people's attitude has changed dramatically though the term "earthquake engineering structure" does not necessarily mean it is an extremely strong or expensive one like the El Castillo pyramid at Chichen Itza.

596px-Snapshot of base isolation effect.jpg

Snapshot from shake-table video of testing [2] base-isolated (right) and regular (left) building model

Currently, the most powerful and cost-effective tool of earthquake engineering is base isolation which makes use of passive structural vibration control technologies, used for example in the Cathedral of Our Lady of the Angels.

Trends and projectsModifica

Some of the new state-of-the-art trends and/or projects in the field of earthquake engineering structures are presented below.

Proofed low cost earthquake building materialModifica

A leading German composite construction company developed a proofed earthquake-safe supported core material RexWall - based on internal beam/frame constructions. The same principle allows construction of hurricane-safe houses.

Earthquake shelterModifica

One Japanese construction company has developed a six-foot cubical shelter, presented as an alternative to earthquake-proofing an entire building.[2]

Concurrent shake-table testingModifica

Concurrent shake-table testing of two or more building models is a vivid, persuasive and effective way to validate earthquake engineering solutions experimentally.

Thus, two wooden houses built before adoption of the 1981 Japanese Building Code were moved to E-Defense [3] for testing (see both pictures aside). The left house was reinforced to enhance its seismic resistance, while the other one was not. These two models were set on E-Defense platform and tested simultaneously [4].

Combined vibration control solutionModifica

413px-Municipal Services Building-1.jpg

Close-up of abutment of seismically retrofitted Municipal Services Building in Glendale, CA

800px-Municipal Services Building.jpg

Seismically retrofitted Municipal Services Building in Glendale, CA

Designed by architect Merrill W. Baird of Glendale, working in collaboration with A. C. Martin Architects of Los Angeles, the Municipal Services Building at 633 East Broadway, Glendale was completed in 1966 [5]. Prominently sited at the corner of East Broadway and Glendale Avenue, this civic building serves as a heraldic element of Glendale’s civic center.

In October 2004 Architectural Resources Group (ARG) was contracted by Nabih Youssef & Associates, Structural Engineers, to provide services regarding a historic resource assessment of the building due to a proposed seismic retrofit.

In 2008, the Municipal Services Building of the City of Glendale, California was seismically retrofitted using an innovative combined vibration control solution: the existing elevated building foundation of the building was put on high damping rubber bearings.

Steel plate shear walls systemModifica

572px-Pages from Kharrazi 0002.jpg

Coupled steel plate shear walls, Seattle, Copyright Mehdi Kharrazi

450px-LA LiveTower05.jpg

The Ritz-Carlton/JW Marriott hotel building engaging the advanced steel plate shear walls system, LA

A steel plate shear wall (SPSW) consists of steel infill plates bounded by a column-beam system. When such infill plates occupy each level within a framed bay of a structure, they constitute a SPSW system [3].

SPSW behavior is analogous to a vertical plate girder cantilevered from its base. Similar to plate girders, the SPSW system optimizes component performance by taking advantage of the post-buckling behavior of the steel infill panels.

The Ritz-Carlton/JW Marriott hotel building, a part of the LA Live development in Los Angeles, California, is the first building in Los Angeles that uses an advanced steel plate shear wall system to resist the lateral loads of strong earthquakes and winds.

Kashiwazaki-Kariwa Nuclear Power Plant is partially upgradedModifica

800px-Kashiwazaki nuclear plant.jpg

Kashiwazaki-Kariwa Nuclear Power Plant: aerial view, Japan

The Kashiwazaki-Kariwa Nuclear Power Plant, the largest nuclear generating station in the world by net electrical power rating, happened to be near the epicenter of the strongest Mw 6.6 July 2007 Chūetsu offshore earthquake [4]. This initiated an extended shutdown for structural inspection which indicated that a greater earthquake-proofing was needed before operation could be resumed [5].

On May 9, 2009, one unit (Unit 7) was restarted, after the seismic upgrades. The test run had to continue for 50 days. The plant had been completely shut down for almost 22 months following the earthquake.

Seismic Test of Seven-Story BuildingModifica

2009-0709-earthquake.jpg

Seven-story wooden structure prior to shake-table testing, Japan

A destructive earthquake struck a lone, wooden condominium in Japan [6]. The experiment was webcast live on July 14, 2009 to yield insight on how to make wooden structures stronger and better able to withstand major earthquakes [7].

The Miki shake at the Hyogo Earthquake Engineering Research Center is the capstone experiment of the four-year NEESWood project, which receives its primary support from the U.S. National Science Foundation Network for Earthquake Engineering Simulation (NEES) Program.

“NEESWood aims to develop a new seismic design philosophy that will provide the necessary mechanisms to safely increase the height of wood-frame structures in active seismic zones of the United States, as well as mitigate earthquake damage to low-rise wood-frame structures,” said Rosowsky, Department of Civil Engineering at Texas A&M University. This philosophy is based on the application of seismic damping systems for wooden buildings. The systems, which can be installed inside the walls of most wooden buildings, include strong metal frame, bracing and dampers filled with viscous fluid.

See alsoModifica

ReferencesModifica

  1. Template:Cite book
  2. [1]
  3. Kharrazi, M.H.K., 2005, “Rational Method for Analysis and Design of Steel Plate Walls,” Ph.D. Dissertation, University of British Columbia, Vancouver, Canada,
  4. Template:Cite news
  5. Asahi.com. Quake exposes nuke-plant danger. July 18, 2007.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.

Inoltre su FANDOM

Wiki casuale